Quick start for racing

Prerequisite: this description assumes the circuit has been correctly setup. It assumes also all hardware and electronics are connected to the computer, and the sensor devices are ready for use.

• Click on button  in the toolbar to open the heat setup view:

• click on "Briefing" tab to setup the heat parameters. 

• Select "Example of Practice settings" in the "Heat Settings" combo box to run a practice mode heat. The "Briefing" is also used to setup more advanced heat parameters.
• click back on the "Heat Setup" tab
• add a driver and a slot car for each lane by using the slotcar and driver combo boxes. The ID combo boxes are used for digital heats, as configured in the "Hardware" view. Drivers and slot cars must have been created before in the corresponding views.

• click on or button to start the heat