Lane supply management
UR30 race management system controls lane supply on analog tracks with appropriate devices. The lane supply control is a powerfull feature used to make heats more realistics and enhance your slot car experience.
Configure hardware
1) Select in the “Hardware/Circuit Setting” screen the power supply event you want to configure:
2) configure the hardware device used to control the lane power supply
Understand the hardware and supply control
The lane power supply works by default in a "Normally Closed" mode if you use relays (home made devices or Phidgets). It also assumes a parallel port out is in a "0" state default value.
Then the lane is supplied as described in following event status:
Following heat events can change the lane supply:
- even start
- out of fuel
- false start penalty
- end of heat until the heat setup screen is back
- pause/resume (track call)